Project
Overview
Components used
Description
Code
Credit
Comments
   
 722
 Report This Project

CNC drawing machine using E-waste

Published Aug 14, 2024
 Apache-2.0
 5 hours to build
 Beginner
arduino

It is a CNC drawing machine which is developed from an E-waste DVD driver .it can draw the image what we have given as input.

display image

Components Used
Arduino UNO
Arduino UNO 		X 1
SG90 micro servo Motor
DFRobot Accessories 9g micro servo (1.6kg) 		X 1
L293D Driver
L293D Driver 		X 1
L293D DRIVER Shield
This is the motor driver used in my project to control the two-stepper motor and one servo motor. 		X 1
Scrap DVD Driver stepper motor
for x- axis and y-axis movement 		X 1
Description

I have created the CNC machine-based drawing tool using Arduino UNO, Scrap DVD Driver stepper motor
for x-axis and y-axis movement, motor driver, etc. 

Machine Drawing: 

Drawing Jerry

 

Arduino Logo Drawing 

it is an CNC writing and drawing machine. I made this machine by using two scrap DVD stepper motor, Arduino board, s90 servo motor and L293D motor driver shield. The two-stepper motor is for moving x and y- axis. The servo motor is used to move the pen up and down.it is a simple Panora graphic pantograph used in this project. We can draw any images by simply converting the image into g-code with the help of Inkscape software and we can feed it into the controller by using the processing3 software.

Codes

Institute / Organization

St Josephs college of engineering Chennai
   
 722
 Report This Project
Comments
Ad